Window Privacy Film Frosted Glass Opaque Vinyl Bathroom Door Decor Stickers UV Blocking Heat Control Coverings for Home Office

Small Tips for YOU,please read before buying.

*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Key Features

• Privacy Levels > 4 Star: create privacy and favorable space, easy to cut into any sizes to meet your special demands.

• Blocks Strong Sunlight and 96% Harmful Uv Rays: let soft lights in, heat insulation in the summer and heat preservation in the winter.

• Thenew strong glue designwill help the mirror window film cling on the window surface firmly and make it available for long time use.

• Environmental and Economical PVC material: ideal for flat, smooth and clean glass surfaces in the bathroom, balcony, living room, bedroom, bathroom, office,hotel, etc.

Installation Instructions

Step 1. Keep Window or Glass Clean

Step 2. Measure the window and determine size

Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap.

Step 4. Wet the Window or Glass with water( the more flowing water, the better)

Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off.

Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours)

Step 7. Much easier than Wall Decals, 2 people work together more efficiently.

Step 8. Enjoy your works!

If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.

Install with Flowing Water, Say Goodby to Sticky Glue

Frequently Asked Questions

Q1: Why does the film peel off？

A1: Clean the surface thoroughly and make sure the surface is clean enough without any dust.

Make sure to remove the first tier of the protection film before applying on the window.

Q2: How can the film stick well and lets bubbles disappear？

A2: Use enough water. The more flowing water, the better. Squeeze out excess water and bubbles with scraper or hard card from middle to edge.

Q3: I have a brightly lit street outside of my apartment, does it protect me from prying eyes?

A3: This frosted window privacy film can provide you with 90% privacy protection, when the interior is bright and the exterior is dark, the interior can be seen from the outside with some contours.

Q4: Is this window film reusable? Will there be any glue marks left after tearing it off?

A4: Yes, reusable. No adhesive, water, scraper, and knife are the only tools you will use. Easy to apply and remove without any residue left on the glass.